DEG-ARRGreen CarbonTier 2 — standardmedium confidence

Reforestation of Degraded Land

Reforestation on degraded land: the initial degradation level defines the baseline and the restoration target.

degraded land reforestationmine reclamationcritical land recovery
Measurement tier
Tier 2 — standard
Model confidence
medium
Uncertainty deduction
−15% on net credits

About this methodology

The Reforestation of Degraded Land profile (DEG-ARR) is a Green Carbon methodology profile used by the Athlas Verity engine to estimate and independently verify carbon outcomes for degraded land reforestation, mine reclamation, critical land recovery. Reforestation on degraded land: the initial degradation level defines the baseline and the restoration target.

Athlas classifies this profile at Tier 2 — standard with medium confidence. Estimates are derived from directly observable satellite signals, and a conservative uncertainty deduction of 15% is applied to net creditable volume. The profile sets parameterisation, dataset bundles and evidence requirements; the core accounting chain is shared across the platform.

Verification is evidence-led. A project mapped to this profile must supply 5 mandatory evidence items plus 1 optional supporting record. Athlas cross-checks the submitted project boundary and documents against 4 Earth-observation and ancillary data layers, then issues a tamper-evident verification report that can be reviewed independently.

How Athlas verifies this

  1. 1

    1. Boundary & evidence intake

    The project boundary (GeoJSON) is ingested and validated against the 6 evidence requirements defined for profile DEG-ARR. Ownership, legality and truthfulness declarations are recorded for the audit trail.

  2. 2

    2. Baseline reconstruction

    Historical reference conditions are reconstructed from the LANDSAT/LC08/C02/T1_L2 layer (SR_B5, SR_B4) using a median reducer at 30 m, giving a defensible counterfactual for degraded land reforestation.

  3. 3

    3. Satellite measurement

    The primary signal is measured from COPERNICUS/S2_SR_HARMONIZED (bands B8, B4) with a median reducer at 10 m, combined with the remaining 3 supporting layers for terrain, moisture, climate and land-cover context.

  4. 4

    4. Conservative accounting

    Results are passed through the shared accounting chain using the profile's own parameters, then reduced by the profile uncertainty deduction of 15% to give a conservative, uncertainty-aware creditable volume.

  5. 5

    5. Report & on-chain anchoring

    A verification report is generated with a tamper-evident hash and anchored immutably, so the Green Carbon result for DEG-ARR can be independently reviewed and its retirement tracked.

Satellite & Earth-observation layers

RoleDatasetBandsReducerScale
degradation indexCOPERNICUS/S2_SR_HARMONIZEDB8, B4median10 m
historical baselineLANDSAT/LC08/C02/T1_L2SR_B5, SR_B4median30 m
terrainCOPERNICUS/DEM/GLO30DEMmean30 m
soil organic carbon map(optional)OpenLandMap/SOL/SOL_ORGANIC-CARBON_USDA-6A1C_M/v02b0mean250 m

Profile parameters & provenance

5 recorded parameters2 externally sourced2 calibrated defaults1 Athlas policy

A calibrated default is not a standard value. Before a claim under this profile is marked verified, every calibrated default it relies on must be replaced or justified with project-specific measurement.

carbonFraction
Externally sourced
0.47

Carbon fraction of dry biomass. 0.47 is the temperate/boreal default and 0.5 the tropical default; both live in this range rather than being a single universal constant.

IPCC Guidelines for National Greenhouse Gas Inventories, Volume 4: Agriculture, Forestry and Other Land Use (2006), Ch. 4, Table 4.5 (carbon fraction of aboveground biomass)

bgbToAgbRatio
Externally sourced
0.26

Belowground to aboveground biomass ratio. Defaults are the per-ecosystem values; a project measurement always overrides.

IPCC Guidelines for National Greenhouse Gas Inventories, Volume 4: Agriculture, Forestry and Other Land Use (2006), Ch. 4, Table 4.4 (root-to-shoot ratio)

annualBiomassGainFraction
Calibrated default
0.045

Fractional biomass increment per year applied to the baseline stock when no growth model is provided.

defaultAgbPerHa
Calibrated default
90

Fallback aboveground biomass density when no inventory exists. Regional default, deliberately at the conservative end so an absent inventory cannot inflate a claim.

IPCC Guidelines for National Greenhouse Gas Inventories, Volume 4: Agriculture, Forestry and Other Land Use (2006), Ch. 4, §4.1 and Table 4.1 (biomass stock defaults by zone)

degradationDeductionPercent
Athlas policy
0.15

Deduction applied when degradation is detected but cannot be quantified. A conservative policy response to an unmeasured risk, not a measured quantity.

Externally sourced

The value comes from the cited standard. A reviewer can open the document and check the number.

Calibrated default

A defensible default drawn from the literature, not a standard value. It must be replaced or justified with project-specific measurement before the claim is verified.

Athlas policy

A deliberate Athlas choice — a buffer, deduction or weighting. Not a scientific constant and never presented as one.

Required evidence

  • Project boundary (GeoJSON)

    Required · accepts geojson, json, zip

  • Permits, legality & land status

    Required · accepts pdf, jpg, png

  • Land ownership / tenure proof

    Required · accepts pdf, jpg, png

  • Management plan

    Required · accepts pdf

  • Data truthfulness declaration

    Required · accepts pdf, jpg, png

  • Project field photos (multi)

    Optional · accepts jpg, png, webp

Verification workflow

Frequently asked questions

What is the Reforestation of Degraded Land (DEG-ARR) methodology profile?

It is a Green Carbon methodology profile in the Athlas Verity library. Reforestation on degraded land: the initial degradation level defines the baseline and the restoration target. It applies to degraded land reforestation, mine reclamation, critical land recovery and sets the parameters, satellite dataset bundle and evidence requirements used to verify a project mapped to it.

What evidence is required for profile DEG-ARR?

Mandatory evidence includes: Project boundary (GeoJSON); Permits, legality & land status; Land ownership / tenure proof; Management plan; Data truthfulness declaration. Optional supporting records such as Project field photos (multi) strengthen the assessment.

How does Athlas verify a DEG-ARR project with satellites?

Athlas measures the project using 4 Earth-observation layers, including COPERNICUS/S2_SR_HARMONIZED (B8, B4). Estimates are conservative: a 15% deduction is applied to net credits.

Which verification domain does DEG-ARR belong to?

Profile DEG-ARR belongs to the Green Carbon domain. Projects are routed through the corresponding verification workflow and dashboard at the Green Carbon verification area.

Related methodology profiles