Biomass Power with Carbon Capture & Storage
Biomass power generation with CO₂ capture and dedicated geological storage: net removal equals captured biogenic CO₂ less lifecycle emissions and storage-loss allowance.
About this methodology
The Biomass Power with Carbon Capture & Storage profile (BECCS-PWR) is a Carbon Removal (CDR) methodology profile used by the Athlas Verity engine to estimate and independently verify carbon outcomes for biomass power beccs, biomass energy with capture, biogenic power capture. Biomass power generation with CO₂ capture and dedicated geological storage: net removal equals captured biogenic CO₂ less lifecycle emissions and storage-loss allowance.
Athlas classifies this profile at Tier 2 — standard with medium confidence. Estimates are derived from directly observable satellite signals, and a conservative uncertainty deduction of 15% is applied to net creditable volume. The profile sets parameterisation, dataset bundles and evidence requirements; the core accounting chain is shared across the platform.
Verification is evidence-led. A project mapped to this profile must supply 6 mandatory evidence items. Athlas cross-checks the submitted project boundary and documents against 4 Earth-observation and ancillary data layers, then issues a tamper-evident verification report that can be reviewed independently.
How Athlas verifies this
- 1
1. Boundary & evidence intake
The project boundary (GeoJSON) is ingested and validated against the 6 evidence requirements defined for profile BECCS-PWR. Ownership, legality and truthfulness declarations are recorded for the audit trail.
- 2
2. Baseline reconstruction
Reference conditions are reconstructed from a multi-year satellite time series to establish a defensible counterfactual for biomass power beccs.
- 3
3. Satellite measurement
The primary signal is measured from COPERNICUS/S2_SR_HARMONIZED (bands B8, B4, B11) with a median reducer at 10 m, combined with the remaining 3 supporting layers for terrain, moisture, climate and land-cover context.
- 4
4. Conservative accounting
Results are passed through the shared accounting chain using the profile's own parameters, then reduced by the profile uncertainty deduction of 15% to give a conservative, uncertainty-aware creditable volume.
- 5
5. Report & on-chain anchoring
A verification report is generated with a tamper-evident hash and anchored immutably, so the Carbon Removal (CDR) result for BECCS-PWR can be independently reviewed and its retirement tracked.
Satellite & Earth-observation layers
| Role | Dataset | Bands | Reducer | Scale |
|---|---|---|---|---|
| feedstock vegetation | COPERNICUS/S2_SR_HARMONIZED | B8, B4, B11 | median | 10 m |
| residue productivity | MODIS/061/MOD17A3HGF | Npp | mean | 500 m |
| storage site terrain | COPERNICUS/DEM/GLO30 | DEM | mean | 30 m |
| residue burning(optional) | MODIS/061/MCD64A1 | BurnDate | max | 500 m |
Profile parameters & provenance
A calibrated default is not a standard value. Before a claim under this profile is marked verified, every calibrated default it relies on must be replaced or justified with project-specific measurement.
Share of the CO2 in the process stream actually captured. Install-specific in practice (typically 85–95 % for amine capture), so the default must be replaced by the vendor guarantee or a performance test.
Share of the feedstock carbon that is biogenic, which decides whether the resulting emissions are counted as removals or as fossil.
Share of injected CO2 assumed retained in the storage complex over the crediting period.
Deduction for activities outside the project boundary that cannot be measured individually. Conservative by construction.
Length of the monitoring period over which removals or avoided emissions are measured. A crediting convention, so it is fixed here rather than chosen per project.
The value comes from the cited standard. A reviewer can open the document and check the number.
A defensible default drawn from the literature, not a standard value. It must be replaced or justified with project-specific measurement before the claim is verified.
A deliberate Athlas choice — a buffer, deduction or weighting. Not a scientific constant and never presented as one.
Required evidence
Feedstock supply & sustainability record
Required · accepts pdf, csv, jpg
Process monitoring / telemetry data
Required · accepts csv, pdf, json
Storage site permit & monitoring plan
Required · accepts pdf
Lifecycle assessment (LCA) report
Required · accepts pdf
Chain-of-custody record
Required · accepts pdf, csv
Data truthfulness declaration
Required · accepts pdf, jpg, png
Verification workflow
Frequently asked questions
What is the Biomass Power with Carbon Capture & Storage (BECCS-PWR) methodology profile?
It is a Carbon Removal (CDR) methodology profile in the Athlas Verity library. Biomass power generation with CO₂ capture and dedicated geological storage: net removal equals captured biogenic CO₂ less lifecycle emissions and storage-loss allowance. It applies to biomass power beccs, biomass energy with capture, biogenic power capture and sets the parameters, satellite dataset bundle and evidence requirements used to verify a project mapped to it.
What evidence is required for profile BECCS-PWR?
Mandatory evidence includes: Feedstock supply & sustainability record; Process monitoring / telemetry data; Storage site permit & monitoring plan; Lifecycle assessment (LCA) report; Chain-of-custody record; Data truthfulness declaration.
How does Athlas verify a BECCS-PWR project with satellites?
Athlas measures the project using 4 Earth-observation layers, including COPERNICUS/S2_SR_HARMONIZED (B8, B4, B11). Estimates are conservative: a 15% deduction is applied to net credits.
Which verification domain does BECCS-PWR belong to?
Profile BECCS-PWR belongs to the Carbon Removal (CDR) domain. Projects are routed through the corresponding verification workflow and dashboard at the Carbon Dioxide Removal verification area.
Related methodology profiles
Biochar Carbon Removal — Soil Application
Biochar Carbon Removal — Non-Soil Material Use
Industrial Biomass Carbon Capture
Direct Air Capture with Dedicated Geological Storage
Direct Air Capture with Mineral Storage / Durable Utilisation
Industrial CO₂ Capture & Geological Storage