Direct Air Capture with Dedicated Geological Storage
Atmospheric CO₂ captured by a dedicated direct-air-capture plant and injected into a monitored geological storage complex; energy intensity is the main deduction driver.
About this methodology
The Direct Air Capture with Dedicated Geological Storage profile (DAC-GEO) is a Carbon Removal (CDR) methodology profile used by the Athlas Verity engine to estimate and independently verify carbon outcomes for direct air capture, dac with geological storage, atmospheric capture facility. Atmospheric CO₂ captured by a dedicated direct-air-capture plant and injected into a monitored geological storage complex; energy intensity is the main deduction driver.
Athlas classifies this profile at Tier 2 — standard with high confidence. Estimates are derived from directly observable satellite signals, and a conservative uncertainty deduction of 10% is applied to net creditable volume. The profile sets parameterisation, dataset bundles and evidence requirements; the core accounting chain is shared across the platform.
Verification is evidence-led. A project mapped to this profile must supply 6 mandatory evidence items. Athlas cross-checks the submitted project boundary and documents against 4 Earth-observation and ancillary data layers, then issues a tamper-evident verification report that can be reviewed independently.
How Athlas verifies this
- 1
1. Boundary & evidence intake
The project boundary (GeoJSON) is ingested and validated against the 6 evidence requirements defined for profile DAC-GEO. Ownership, legality and truthfulness declarations are recorded for the audit trail.
- 2
2. Baseline reconstruction
Reference conditions are reconstructed from a multi-year satellite time series to establish a defensible counterfactual for direct air capture.
- 3
3. Satellite measurement
The primary signal is measured from COPERNICUS/DEM/GLO30 (bands DEM) with a mean reducer at 30 m, combined with the remaining 3 supporting layers for terrain, moisture, climate and land-cover context.
- 4
4. Conservative accounting
Results are passed through the shared accounting chain using the profile's own parameters, then reduced by the profile uncertainty deduction of 10% to give a conservative, uncertainty-aware creditable volume.
- 5
5. Report & on-chain anchoring
A verification report is generated with a tamper-evident hash and anchored immutably, so the Carbon Removal (CDR) result for DAC-GEO can be independently reviewed and its retirement tracked.
Satellite & Earth-observation layers
| Role | Dataset | Bands | Reducer | Scale |
|---|---|---|---|---|
| storage site terrain | COPERNICUS/DEM/GLO30 | DEM | mean | 30 m |
| surface deformation monitoring(optional) | COPERNICUS/S1_GRD | VV | median | 10 m |
| site land cover | ESA/WorldCover/v200 | Map | mode | 10 m |
| energy context(optional) | ECMWF/ERA5_LAND/MONTHLY_AGGR | temperature_2m | mean | 11132 m |
Profile parameters & provenance
A calibrated default is not a standard value. Before a claim under this profile is marked verified, every calibrated default it relies on must be replaced or justified with project-specific measurement.
Share of the CO2 in the process stream actually captured. Install-specific in practice (typically 85–95 % for amine capture), so the default must be replaced by the vendor guarantee or a performance test.
Energy required per tonne of CO2 captured or converted. Defaults differ per removal method and must be replaced by plant measurements.
Share of injected CO2 assumed retained in the storage complex over the crediting period.
Deduction for activities outside the project boundary that cannot be measured individually. Conservative by construction.
Length of the monitoring period over which removals or avoided emissions are measured. A crediting convention, so it is fixed here rather than chosen per project.
The value comes from the cited standard. A reviewer can open the document and check the number.
A defensible default drawn from the literature, not a standard value. It must be replaced or justified with project-specific measurement before the claim is verified.
A deliberate Athlas choice — a buffer, deduction or weighting. Not a scientific constant and never presented as one.
Required evidence
Process monitoring / telemetry data
Required · accepts csv, pdf, json
Storage site permit & monitoring plan
Required · accepts pdf
Energy consumption records
Required · accepts csv, pdf
Lifecycle assessment (LCA) report
Required · accepts pdf
Chain-of-custody record
Required · accepts pdf, csv
Data truthfulness declaration
Required · accepts pdf, jpg, png
Verification workflow
Frequently asked questions
What is the Direct Air Capture with Dedicated Geological Storage (DAC-GEO) methodology profile?
It is a Carbon Removal (CDR) methodology profile in the Athlas Verity library. Atmospheric CO₂ captured by a dedicated direct-air-capture plant and injected into a monitored geological storage complex; energy intensity is the main deduction driver. It applies to direct air capture, dac with geological storage, atmospheric capture facility and sets the parameters, satellite dataset bundle and evidence requirements used to verify a project mapped to it.
What evidence is required for profile DAC-GEO?
Mandatory evidence includes: Process monitoring / telemetry data; Storage site permit & monitoring plan; Energy consumption records; Lifecycle assessment (LCA) report; Chain-of-custody record; Data truthfulness declaration.
How does Athlas verify a DAC-GEO project with satellites?
Athlas measures the project using 4 Earth-observation layers, including COPERNICUS/DEM/GLO30 (DEM). Estimates are conservative: a 10% deduction is applied to net credits.
Which verification domain does DAC-GEO belong to?
Profile DAC-GEO belongs to the Carbon Removal (CDR) domain. Projects are routed through the corresponding verification workflow and dashboard at the Carbon Dioxide Removal verification area.
Related methodology profiles
Biochar Carbon Removal — Soil Application
Biochar Carbon Removal — Non-Soil Material Use
Biomass Power with Carbon Capture & Storage
Industrial Biomass Carbon Capture
Direct Air Capture with Mineral Storage / Durable Utilisation
Industrial CO₂ Capture & Geological Storage