HYDRO-RORRenewable EnergyTier 3 — high assurancemedium confidence

Run-of-River & Small Hydropower

Run-of-river and small hydropower: metered generation plus reservoir-flooding area monitoring so that methane and land-clearing effects are not ignored.

run-of-river hydropowersmall hydropowermicro hydro
Measurement tier
Tier 3 — high assurance
Model confidence
medium
Uncertainty deduction
−10% on net credits

About this methodology

The Run-of-River & Small Hydropower profile (HYDRO-ROR) is a Renewable Energy methodology profile used by the Athlas Verity engine to estimate and independently verify carbon outcomes for run-of-river hydropower, small hydropower, micro hydro. Run-of-river and small hydropower: metered generation plus reservoir-flooding area monitoring so that methane and land-clearing effects are not ignored.

Athlas classifies this profile at Tier 3 — high assurance with medium confidence. Estimates are derived from directly observable satellite signals, and a conservative uncertainty deduction of 10% is applied to net creditable volume. The profile sets parameterisation, dataset bundles and evidence requirements; the core accounting chain is shared across the platform.

Verification is evidence-led. A project mapped to this profile must supply 6 mandatory evidence items plus 1 optional supporting record. Athlas cross-checks the submitted project boundary and documents against 4 Earth-observation and ancillary data layers, then issues a tamper-evident verification report that can be reviewed independently.

How Athlas verifies this

  1. 1

    1. Boundary & evidence intake

    The project boundary (GeoJSON) is ingested and validated against the 7 evidence requirements defined for profile HYDRO-ROR. Ownership, legality and truthfulness declarations are recorded for the audit trail.

  2. 2

    2. Baseline reconstruction

    Historical reference conditions are reconstructed from the COPERNICUS/S2_SR_HARMONIZED layer (B8, B4) using a median reducer at 10 m, giving a defensible counterfactual for run-of-river hydropower.

  3. 3

    3. Satellite measurement

    The primary signal is measured from UCSB-CHG/CHIRPS/DAILY (bands precipitation) with a sum reducer at 5566 m, combined with the remaining 3 supporting layers for terrain, moisture, climate and land-cover context.

  4. 4

    4. Conservative accounting

    Results are passed through the shared accounting chain using the profile's own parameters, then reduced by the profile uncertainty deduction of 10% to give a conservative, uncertainty-aware creditable volume.

  5. 5

    5. Report & on-chain anchoring

    A verification report is generated with a tamper-evident hash and anchored immutably, so the Renewable Energy result for HYDRO-ROR can be independently reviewed and its retirement tracked.

Satellite & Earth-observation layers

RoleDatasetBandsReducerScale
hydrology contextUCSB-CHG/CHIRPS/DAILYprecipitationsum5566 m
reservoir footprintJRC/GSW1_4/GlobalSurfaceWateroccurrence, seasonalitymean30 m
vegetation baselineCOPERNICUS/S2_SR_HARMONIZEDB8, B4median10 m
terrainCOPERNICUS/DEM/GLO30DEMmean30 m

Profile parameters & provenance

5 recorded parameters0 externally sourced3 calibrated defaults2 Athlas policy

A calibrated default is not a standard value. Before a claim under this profile is marked verified, every calibrated default it relies on must be replaced or justified with project-specific measurement.

reservoirAreaHa
Calibrated default
0

Flooded area of a hydro reservoir, used to size the reservoir methane term.

reservoirMethaneCapTPerMwh
Athlas policy
0.05

Conservative ceiling on reservoir methane attributed per MWh. Applied so a project cannot report zero reservoir emissions by omission.

flowReliabilityPercent
Calibrated default
90

Reliability of the feedstock or fuel flow, affecting annual operating hours.

gridEmissionFactorTPerMwh
Calibrated default
0.75

Grid emission factor used to convert displaced electricity into avoided CO2e. These are country-level defaults; a verified claim must replace them with the factor published for the crediting period by the grid operator or national inventory.

plantLifetimeYears
Athlas policy
30

Crediting lifetime assumed for the plant. A methodological convention, not a physical property.

Externally sourced

The value comes from the cited standard. A reviewer can open the document and check the number.

Calibrated default

A defensible default drawn from the literature, not a standard value. It must be replaced or justified with project-specific measurement before the claim is verified.

Athlas policy

A deliberate Athlas choice — a buffer, deduction or weighting. Not a scientific constant and never presented as one.

Required evidence

  • Project boundary (GeoJSON)

    Required · accepts geojson, json, zip

  • Metering / generation records

    Required · accepts csv, pdf, xlsx

  • Grid connection / power offtake agreement

    Required · accepts pdf

  • Grid emission factor evidence (combined margin)

    Required · accepts pdf, csv

  • Land ownership / tenure proof

    Required · accepts pdf, jpg, png

  • Data truthfulness declaration

    Required · accepts pdf, jpg, png

  • Project field photos (multi)

    Optional · accepts jpg, png, webp

Verification workflow

Frequently asked questions

What is the Run-of-River & Small Hydropower (HYDRO-ROR) methodology profile?

It is a Renewable Energy methodology profile in the Athlas Verity library. Run-of-river and small hydropower: metered generation plus reservoir-flooding area monitoring so that methane and land-clearing effects are not ignored. It applies to run-of-river hydropower, small hydropower, micro hydro and sets the parameters, satellite dataset bundle and evidence requirements used to verify a project mapped to it.

What evidence is required for profile HYDRO-ROR?

Mandatory evidence includes: Project boundary (GeoJSON); Metering / generation records; Grid connection / power offtake agreement; Grid emission factor evidence (combined margin); Land ownership / tenure proof; Data truthfulness declaration. Optional supporting records such as Project field photos (multi) strengthen the assessment.

How does Athlas verify a HYDRO-ROR project with satellites?

Athlas measures the project using 4 Earth-observation layers, including UCSB-CHG/CHIRPS/DAILY (precipitation). Estimates are conservative: a 10% deduction is applied to net credits.

Which verification domain does HYDRO-ROR belong to?

Profile HYDRO-ROR belongs to the Renewable Energy domain. Projects are routed through the corresponding verification workflow and dashboard at the Renewable Energy verification area.

Related methodology profiles