FERM-CCSCarbon Removal (CDR)Tier 2 — standardmedium confidence

Biomass Fermentation with Carbon Capture & Geologic Storage

Fermentation of biomass to fuels or chemicals with the resulting biogenic CO₂ captured and geologically stored; biogenic-provenance evidence is mandatory.

biomass fermentationfermentation capturebioethanol with capture
Measurement tier
Tier 2 — standard
Model confidence
medium
Uncertainty deduction
−15% on net credits

About this methodology

The Biomass Fermentation with Carbon Capture & Geologic Storage profile (FERM-CCS) is a Carbon Removal (CDR) methodology profile used by the Athlas Verity engine to estimate and independently verify carbon outcomes for biomass fermentation, fermentation capture, bioethanol with capture. Fermentation of biomass to fuels or chemicals with the resulting biogenic CO₂ captured and geologically stored; biogenic-provenance evidence is mandatory.

Athlas classifies this profile at Tier 2 — standard with medium confidence. Estimates are derived from directly observable satellite signals, and a conservative uncertainty deduction of 15% is applied to net creditable volume. The profile sets parameterisation, dataset bundles and evidence requirements; the core accounting chain is shared across the platform.

Verification is evidence-led. A project mapped to this profile must supply 6 mandatory evidence items. Athlas cross-checks the submitted project boundary and documents against 3 Earth-observation and ancillary data layers, then issues a tamper-evident verification report that can be reviewed independently.

How Athlas verifies this

  1. 1

    1. Boundary & evidence intake

    The project boundary (GeoJSON) is ingested and validated against the 6 evidence requirements defined for profile FERM-CCS. Ownership, legality and truthfulness declarations are recorded for the audit trail.

  2. 2

    2. Baseline reconstruction

    Reference conditions are reconstructed from a multi-year satellite time series to establish a defensible counterfactual for biomass fermentation.

  3. 3

    3. Satellite measurement

    The primary signal is measured from COPERNICUS/S2_SR_HARMONIZED (bands B8, B4, B11) with a median reducer at 10 m, combined with the remaining 2 supporting layers for terrain, moisture, climate and land-cover context.

  4. 4

    4. Conservative accounting

    Results are passed through the shared accounting chain using the profile's own parameters, then reduced by the profile uncertainty deduction of 15% to give a conservative, uncertainty-aware creditable volume.

  5. 5

    5. Report & on-chain anchoring

    A verification report is generated with a tamper-evident hash and anchored immutably, so the Carbon Removal (CDR) result for FERM-CCS can be independently reviewed and its retirement tracked.

Satellite & Earth-observation layers

RoleDatasetBandsReducerScale
feedstock vegetationCOPERNICUS/S2_SR_HARMONIZEDB8, B4, B11median10 m
residue productivityMODIS/061/MOD17A3HGFNppmean500 m
storage site terrain(optional)COPERNICUS/DEM/GLO30DEMmean30 m

Profile parameters & provenance

5 recorded parameters0 externally sourced3 calibrated defaults2 Athlas policy

A calibrated default is not a standard value. Before a claim under this profile is marked verified, every calibrated default it relies on must be replaced or justified with project-specific measurement.

captureEfficiencyPercent
Calibrated default
95

Share of the CO2 in the process stream actually captured. Install-specific in practice (typically 85–95 % for amine capture), so the default must be replaced by the vendor guarantee or a performance test.

biogenicShareOfSourcePercent
Calibrated default
100

Biogenic share of the energy source, applied when a mixed fuel is used.

yieldTonnesPerTFeedstock
Calibrated default
0.35

Product yield per tonne of feedstock. Plant-specific in practice; the default is a mid-range figure for planning, not a performance guarantee.

lifecycleDeductionPercent
Athlas policy
20

Deduction for activities outside the project boundary that cannot be measured individually. Conservative by construction.

monitoringYears
Athlas policy
30

Length of the monitoring period over which removals or avoided emissions are measured. A crediting convention, so it is fixed here rather than chosen per project.

Externally sourced

The value comes from the cited standard. A reviewer can open the document and check the number.

Calibrated default

A defensible default drawn from the literature, not a standard value. It must be replaced or justified with project-specific measurement before the claim is verified.

Athlas policy

A deliberate Athlas choice — a buffer, deduction or weighting. Not a scientific constant and never presented as one.

Required evidence

  • Feedstock supply & sustainability record

    Required · accepts pdf, csv, jpg

  • Process monitoring / telemetry data

    Required · accepts csv, pdf, json

  • Storage site permit & monitoring plan

    Required · accepts pdf

  • Lifecycle assessment (LCA) report

    Required · accepts pdf

  • Chain-of-custody record

    Required · accepts pdf, csv

  • Data truthfulness declaration

    Required · accepts pdf, jpg, png

Verification workflow

Frequently asked questions

What is the Biomass Fermentation with Carbon Capture & Geologic Storage (FERM-CCS) methodology profile?

It is a Carbon Removal (CDR) methodology profile in the Athlas Verity library. Fermentation of biomass to fuels or chemicals with the resulting biogenic CO₂ captured and geologically stored; biogenic-provenance evidence is mandatory. It applies to biomass fermentation, fermentation capture, bioethanol with capture and sets the parameters, satellite dataset bundle and evidence requirements used to verify a project mapped to it.

What evidence is required for profile FERM-CCS?

Mandatory evidence includes: Feedstock supply & sustainability record; Process monitoring / telemetry data; Storage site permit & monitoring plan; Lifecycle assessment (LCA) report; Chain-of-custody record; Data truthfulness declaration.

How does Athlas verify a FERM-CCS project with satellites?

Athlas measures the project using 3 Earth-observation layers, including COPERNICUS/S2_SR_HARMONIZED (B8, B4, B11). Estimates are conservative: a 15% deduction is applied to net credits.

Which verification domain does FERM-CCS belong to?

Profile FERM-CCS belongs to the Carbon Removal (CDR) domain. Projects are routed through the corresponding verification workflow and dashboard at the Carbon Dioxide Removal verification area.

Related methodology profiles