MIN-REMCarbon Removal (CDR)Tier 2 — standardmedium confidence

Carbon Mineralisation Using Reactive Mineral Waste

CO₂ reacted with alkaline mineral waste (slags, tailings, ashes) to form stable carbonates; removal is derived from carbonation efficiency and feedstock chemistry.

mineral carbonationreactive mineral wastesteel slag carbonation
Measurement tier
Tier 2 — standard
Model confidence
medium
Uncertainty deduction
−15% on net credits

About this methodology

The Carbon Mineralisation Using Reactive Mineral Waste profile (MIN-REM) is a Carbon Removal (CDR) methodology profile used by the Athlas Verity engine to estimate and independently verify carbon outcomes for mineral carbonation, reactive mineral waste, steel slag carbonation. CO₂ reacted with alkaline mineral waste (slags, tailings, ashes) to form stable carbonates; removal is derived from carbonation efficiency and feedstock chemistry.

Athlas classifies this profile at Tier 2 — standard with medium confidence. Estimates are derived from directly observable satellite signals, and a conservative uncertainty deduction of 15% is applied to net creditable volume. The profile sets parameterisation, dataset bundles and evidence requirements; the core accounting chain is shared across the platform.

Verification is evidence-led. A project mapped to this profile must supply 5 mandatory evidence items plus 1 optional supporting record. Athlas cross-checks the submitted project boundary and documents against 2 Earth-observation and ancillary data layers, then issues a tamper-evident verification report that can be reviewed independently.

How Athlas verifies this

  1. 1

    1. Boundary & evidence intake

    The project boundary (GeoJSON) is ingested and validated against the 6 evidence requirements defined for profile MIN-REM. Ownership, legality and truthfulness declarations are recorded for the audit trail.

  2. 2

    2. Baseline reconstruction

    Reference conditions are reconstructed from a multi-year satellite time series to establish a defensible counterfactual for mineral carbonation.

  3. 3

    3. Satellite measurement

    The primary signal is measured from ESA/WorldCover/v200 (bands Map) with a mode reducer at 10 m, combined with the remaining 1 supporting layers for terrain, moisture, climate and land-cover context.

  4. 4

    4. Conservative accounting

    Results are passed through the shared accounting chain using the profile's own parameters, then reduced by the profile uncertainty deduction of 15% to give a conservative, uncertainty-aware creditable volume.

  5. 5

    5. Report & on-chain anchoring

    A verification report is generated with a tamper-evident hash and anchored immutably, so the Carbon Removal (CDR) result for MIN-REM can be independently reviewed and its retirement tracked.

Satellite & Earth-observation layers

RoleDatasetBandsReducerScale
site land coverESA/WorldCover/v200Mapmode10 m
storage site terrain(optional)COPERNICUS/DEM/GLO30DEMmean30 m

Profile parameters & provenance

5 recorded parameters0 externally sourced5 calibrated defaults0 Athlas policy

A calibrated default is not a standard value. Before a claim under this profile is marked verified, every calibrated default it relies on must be replaced or justified with project-specific measurement.

carbonationEfficiencyPercent
Calibrated default
70

Share of the theoretical mineral carbonation actually achieved.

reactiveMineralFraction
Calibrated default
0.3

Share of the applied rock that is reactive mineral. Depends on the quarry source and must be measured per supplier.

removalPerTMineralTco2
Calibrated default
0.15

Theoretical CO2 uptake per tonne of reactive mineral, before the reactive fraction is applied.

energyDeductionPercent
Calibrated default
10

Energy consumed within the project boundary as a share of gross output.

productDurabilityYears
Calibrated default
100

Service life of the long-lived product that stores biogenic carbon.

Externally sourced

The value comes from the cited standard. A reviewer can open the document and check the number.

Calibrated default

A defensible default drawn from the literature, not a standard value. It must be replaced or justified with project-specific measurement before the claim is verified.

Athlas policy

A deliberate Athlas choice — a buffer, deduction or weighting. Not a scientific constant and never presented as one.

Required evidence

  • Feedstock supply & sustainability record

    Required · accepts pdf, csv, jpg

  • Process monitoring / telemetry data

    Required · accepts csv, pdf, json

  • Soil / biomass lab certificate (optional calibration)

    Optional · accepts pdf

  • Offtake / end-use agreement

    Required · accepts pdf

  • Lifecycle assessment (LCA) report

    Required · accepts pdf

  • Data truthfulness declaration

    Required · accepts pdf, jpg, png

Verification workflow

Frequently asked questions

What is the Carbon Mineralisation Using Reactive Mineral Waste (MIN-REM) methodology profile?

It is a Carbon Removal (CDR) methodology profile in the Athlas Verity library. CO₂ reacted with alkaline mineral waste (slags, tailings, ashes) to form stable carbonates; removal is derived from carbonation efficiency and feedstock chemistry. It applies to mineral carbonation, reactive mineral waste, steel slag carbonation and sets the parameters, satellite dataset bundle and evidence requirements used to verify a project mapped to it.

What evidence is required for profile MIN-REM?

Mandatory evidence includes: Feedstock supply & sustainability record; Process monitoring / telemetry data; Offtake / end-use agreement; Lifecycle assessment (LCA) report; Data truthfulness declaration. Optional supporting records such as Soil / biomass lab certificate (optional calibration) strengthen the assessment.

How does Athlas verify a MIN-REM project with satellites?

Athlas measures the project using 2 Earth-observation layers, including ESA/WorldCover/v200 (Map). Estimates are conservative: a 15% deduction is applied to net credits.

Which verification domain does MIN-REM belong to?

Profile MIN-REM belongs to the Carbon Removal (CDR) domain. Projects are routed through the corresponding verification workflow and dashboard at the Carbon Dioxide Removal verification area.

Related methodology profiles